|
|
|
|
|
|
 | Wooska
Presents: 
|
| Bark'n Boots™ Skyliner™ - The everyday dog boot |
 Ruff Wear
Bark'n Boots™
Skyliner™
Set of 4 Boots |
|
|
|
|
|
|
|
|
|
Ruff Wear
Bark'n Boots™
Skyliner™
Individual Boots |
|
|
|
|
|
|
|
|
|
|
 Description:
Stay active and relieve stress with a dog walk, run, or outing you’ll both enjoy. These boots will provide everyday traction and paw protection from a wide range
of temperatures, abrasive surfaces and unseen hazards, while also improving mobility in older dogs.
Use:
Protect your pup’s paws with this everyday dog boot and indulge in the casual, carefree life of a dog. Stay active and
relieve stress with a dog walk, run or exploration you’ll both enjoy. Use daily to protect paws from a wide range of
temperatures, abrasive surfaces, and unseen hazards. The boots provide traction and improve mobility for older dogs.
|
|
Features:
- Pliable sole and low-profile lug is flexible and comfortable
- Stretch gaiter is easy to grab and adjust, keeps out dirt, and protects the leg
- Sure cinch hook-and-loop closure strap keeps boots on paws
- Non-marking sole for nautical and home interior uses
- Machine washable
|
Sizing - Please read carefully
Bark'n Boots are built to secure around the ankle but below the carpal pad. The boot should have room in the paw area,
allowing the paw to spread when bearing weight.
How To SizeBark'n Boots
Measuring Paw Width
1. Have your dog stand on a firm surface (wood, linoleum, or concrete).
2. Place a piece of blank paper under a front paw.
3. Lift the dog's other front paw so that its weight is placed firmly on the paw being measured.
4. Mark the paper at the paw's widest point on the left and right edges of the paw
5. Use a ruler to measure the width of the paw (in inches) from the left mark to the right mark.
6. Use the chart to determine the proper size. For example: if the width is measured between 2.5" and 2.75", the dog would wear a small
boot; between 3.0" and 3.25", a large.
Use the tables below to size your dog's Bark'N Boots:
| size |
paw width† |
| XXX Small |
1.25 - 1.5" |
3.2 - 3.8 cm |
| XX Small |
1.5 - 2.0" |
3.8 - 5.1 cm |
| X Small |
2.0 - 2.25" |
5.1 - 5.7 cm |
| Small |
2.25 - 2.5" |
5.7 - 6.4 cm |
| Medium |
2.5 - 2.75" |
6.4 - 7.0 cm |
| Large |
2.75 - 3.0" |
7.0 - 7.6 cm |
| X Large |
3.0 - 3.25" |
7.6 - 8.3 cm |
|
†width=measurement across the widest
part of the paw, when bearing weight
|
|
|
|
Ruff Wear
Bark’n Boot Liners™
Set of 4 |
|
|
|
|
|
|
|
|
|
 |
| Our Bark'n Boot Liners™ will enhance the
fit, upgrade the performance, and improve the comfort of dog boots. Designed to be used with our Bark'n Boot™ Grip Trex™ dog boots.
Use:
- Comfort and protection while wearing dog boots (can be worn with any and all dog boots)
- We highly recommend trimming your dog’s nails to help extend the life of the boot liners
- Not to be used without dog boots
Fit:
- Easy to put on: stretchable with a tight fitting cuff
Features:
- Wick moisture away from the paws in warm conditions
- Insulate paws during cold conditions
- Protect paws from abrasion and irritation
- Durable double knit construction with reinforced toe box and cuff
- 73% Polyamide, 24% Polyester, 3% Spandex
Select the size which matches your boot size |
|
|
|
We Accept: 
Purchase Orders |
|